Signs Your Car Needs a Brake Check
Driving through the busy streets of Dhaka or the peaceful avenues of Gulshan in your beloved vehicle, whether it’s a stylish Audi, a commanding Mercedes-Benz, a luxurious BMW, a stunning Porsche, a dependable Land Rover or Range Rover, a renowned Prado, a trustworthy Toyota Land Cruiser, or the epitome of luxury, a Rolls Royce – you should feel assured and in command while driving. SNM Auto, the leading automotive service center in Dhaka and Gulshan, recognizes the importance of maintaining your valued possession in top condition, ensuring that every journey is a delight.
Ensuring the proper maintenance of your car includes paying attention to the health of the braking system. Your brakes serve as the silent protectors of your safety, silently working to bring your car to a stop whenever necessary. Identifying when these protectors need maintenance is crucial. At SNM Auto, we’ve put together a detailed manual to assist you in recognizing the unmistakable signals that it’s time to have your brakes inspected.
Unusual Noises: A Symphony of Warning
Screeching or Grinding, This is a loud and clear warning that your brake pads are nearing the end of their lifespan. When the pads wear down to a minimum thickness, a metal wear indicator scrapes against the brake rotor, producing this harsh screeching sound. Ignoring this screech can lead to metal-on-metal contact between the rotor and the caliper, causing significant damage to both components. This situation not only compromises your braking performance but also becomes a costly repair.
Brake issues may be indicated by squeaking noises, which are not as concerning as screeching but should not be ignored. This sound can result from worn brake pads nearing their wear limit, low brake fluid levels, or debris accumulating on braking components. It’s essential to address squeaking brakes promptly to prevent more severe problems from developing.
Clicking noises while braking could signal loose braking system components or a damaged ABS sensor. Loose components may lead to uneven braking or a spongy brake pedal, while a faulty ABS sensor can impede the Anti-lock Brake System’s ability to prevent wheel lockup during heavy braking.
Changes in Braking Performance: When Stopping Becomes a Struggle
The brake pedal feels spongy or travels to the floor before engaging, which indicates a potential brake fluid system leak. Addressing a soft brake pedal promptly is essential since it reduces braking effectiveness and poses a safety risk.
A noticeable increase in stopping distance indicates that your braking system requires attention. This longer stopping distance could be caused by worn brake pads, warped rotors, or a malfunctioning braking system component.
Experiencing vibrations while braking could be due to a shuddering or pulsating feeling in the steering wheel or brake pedal, which is likely caused by warped brake rotors. Warped rotors may develop as a result of overheating, uneven wear, or manufacturing defects, leading to both vibrations and diminished braking performance.
The dashboard ABS light will turn on if there’s a problem with the Anti-lock Brake System, which is responsible for preventing wheel lockup during heavy braking. If this light comes on, it’s essential to have a qualified technician inspect your car to identify and resolve any ABS system issues.
In many modern vehicles, a brake pad wear indicator light will illuminate on the dashboard when the brake pads have worn down and need to be replaced. It’s important not to overlook this critical warning – it serves as a timely reminder to schedule a brake service before your brakes are compromised.
After braking, if you notice a burning smell, it could mean that the brakes are overheating or that there is a brake fluid leak. Brakes can overheat due to excessive braking, overloading the vehicle, or driving down steep inclines. A leaking brake fluid may indicate a worn-out seal or damaged brake line. Immediate attention is necessary in both cases to prevent further damage and ensure safety.
When applying the brakes, if your car pulls to one side, it might be due to a seized caliper, uneven brake pad wear, or issues with the suspension system. A seized caliper can hinder one wheel from braking properly, resulting in the car pulling in that direction. Pulling may also be caused by uneven brake pad wear, with one side of the car experiencing more braking force. If there is a problem with the suspension component, it can cause misalignment and lead to the car pulling while braking. Regardless of the reason, pulling during braking poses a safety risk and necessitates professional diagnosis and repair.
Why Choose SNM Auto for Your Brake Check in Dhaka?
At SNM Auto, we are passionate about providing exceptional service for European and Hybrid vehicles. Our team of highly trained and certified technicians possesses the expertise to diagnose and repair any brake issue on your Audi, Mercedes-Benz, BMW, Porsche, Land Rover, Range Rover, Prado, Toyota Land Cruiser, or Rolls Royce. We are equipped with cutting-edge technology and utilize genuine parts from reputable manufacturers to ensure optimal performance and safety for your prized possession.